We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Make Your Own Soft Plastic Fishing Lures Kit: A Step-by-Step Guide (2026)

Learn how to make your own soft plastic fishing lures kit, from choosing molds and plastisol to pouring, curing and rigging your first saltwater baits.

Updated November 2026

A make your own soft plastic fishing lures kit lets you pour custom baits in the colors, sizes and profiles your local fish are feeding on. With a mold, a melting setup and a few colorants, you can turn out a batch of shrimp, paddle tails or jerkbaits in an afternoon. This guide walks through what to gather, how to pour, and where beginners usually go wrong.

What Your Kit Needs to Include

Most beginner kits combine a melting pot, a thermometer, silicone molds, plastisol or a similar plastic base, and colorant. Some also bundle hooks, scent and a pouring ladle. Before buying, check that the kit lists a temperature-controlled melter, since plastisol needs to stay within a narrow heat range to pour cleanly. For a broader comparison, see 7 Best Soft Plastic Fishing Lure Kits for Beginners (2026).

Shopping for one? See our guide: Making Soft Plastic Fishing Lures: 7 Best Kits and Plastisol Picks (2026).

Plastisol is the most common base for saltwater work because it is tough and holds up to repeated strikes. Pick a formula labeled for fishing use, and keep it sealed when not in use so it does not absorb moisture or dust.

Step-by-Step: Pouring Your First Batch

  1. Set up in a ventilated area away from food prep. Plastisol fumes are unpleasant, and spills are hard to clean from counters.
  2. Preheat the melter to the temperature listed on your plastisol label, usually in the range the manufacturer specifies. Check it with a thermometer rather than trusting the dial.
  3. Add colorant a few drops at a time and stir until fully blended. Color lightens as it cools, so pour a test if you are matching a specific shade.
  4. Add scent or salt flakes now if your recipe calls for them, then stir gently to avoid bubbles.
  5. Pour slowly into the mold until it is level with the cavity rim. Tap the mold lightly on the bench to release trapped air.
  6. Let the bait cool and set according to the plastisol instructions. Do not pop baits out early, or they may tear or deform.
  7. Remove baits, trim any flash or sprue with scissors, and store them flat in a sealed container.

Choosing a Mold

Molds are where your bait profile comes from. Start with one or two shapes that match what you fish, such as a paddle tail for inshore redfish or a shrimp for flats work. For a sizing reference, see 5 Best Soft Plastic Lure Molds for Beginners (2026) and 5 Best Soft Plastic Lures for Striped Bass in 2026 for profiles that already perform in surf and jetty settings.

Rigging and Using Your Homemade Baits

Homemade plastics take the same rigs as store-bought ones. Use a jighead or weedless hook matched to the bait weight, and keep the hook point clear of the body so it sets reliably. Rig a test bait in the sink or a bucket before you take it to the water to confirm the hook sits straight. Anglers building a full setup often pair their soft plastics with braided main line; Braided Fishing Line Uses: When It Makes Sense and When It Doesn't explains when that combination works best.

Common Mistakes and Tips

  • Overheating plastisol. Scorched plastic pours cloudy and loses its toughness, so stay within the label range.
  • Pouring too fast, which traps air and leaves voids in the tail or fins.
  • Pulling baits from molds before they have fully set.
  • Using too much colorant. Start with a few drops and build up.
  • Skipping a label check on scent or additives. Use only products made for plastic fishing baits.
  • Temperature-controlled melting pot: keeps plastisol in its working range so your pours stay consistent. View on Amazon
  • Silicone soft plastic molds: flexible cavities release baits cleanly, especially with detailed shapes. View on Amazon
  • Plastisol fishing bait base: the core material that gives your lures their flex and durability. View on Amazon

FAQ

Is making soft plastic lures safe for beginners?

It is manageable with care. Work in a ventilated space, keep a fire extinguisher nearby, and never leave a heating pot unattended. Consult a professional or the plastisol manufacturer if you have any health concerns about fumes.

How long does a batch take to make?

Preheating and cooling dominate the time, so a small batch can take a few hours from setup to finished baits. Plan for extra time on your first few pours while you learn the timing.

Can I use homemade lures in saltwater?

Yes, as long as you use a plastic base rated for fishing and rig with corrosion-resistant hooks. Rinse baits with fresh water after each trip to extend their life.

Conclusion

A make your own soft plastic fishing lures kit gives you control over profile, color and scent for less effort than it first appears. Start with one mold, follow the temperature and cooling steps closely, and test your baits before the trip. Your first batch will teach you more than any checklist.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our saltwater fishing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Caleb Morgan
Caleb Morgan

Caleb Morgan writes reviews and buying guides for Saltwater Fishing.