We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Untwist Braided Fishing Line: A Step-by-Step Guide for Saltwater Anglers

Learn how to untwist braided fishing line quickly with simple steps, tools and fixes for tangles, loops and spool twist before your next saltwater trip.

Updated November 2026

To untwist braided fishing line, you let the line relax, work the twist out section by section, and stop before you create new kinks. Most twist comes from a reel that was spooled with line under tension, a lure spun during the cast, or a line that was reeled in backward. With patience and a few basic tools, you can usually bring a tangled spool back to a smooth, usable state.

First, Find Out Where the Twist Came From

Braid is thin and dense, so a twist that looks small on the spool can knot up badly once it reaches the guides. Before you start working, check whether the twist is in the line still on the spool or only in the section you pulled off. Also look at the terminal tackle. A spinning lure or swivel that has been spinning freely will often be the source.

Shopping for one? See our guide: 6 Best Fishing Braided Lines: Top Picks Compared for 2026.

If the line is coiled loosely from a fresh spool, the twist is usually stored energy from the packaging. If it developed after a few casts, the cause is more likely a bail that was closed while you reeled in fast or a lure that rotated in the water.

Untwisting the Line Step by Step

  1. Cut the line at the first big kink and remove the affected section if it is short, since a sharp loop can weaken braid.
  2. Stretch the line out in a long, straight run, ideally 20 to 30 feet, and let it lie in the sun or on a flat surface for several minutes.
  3. Hold one end and walk the other end slowly, letting the line drag behind you so each turn works loose.
  4. For a heavily twisted spool, remove the line from the reel, flip the spool over, and reel it back on with light tension while the line is run through your fingers.
  5. Test the line by pulling it slowly through a folded cloth. Twist should disappear, and loops should flatten.

Working Through a Tight Loop

Do not pull hard on a tight loop, because braid tightens around itself and can crack the coating. Instead, open the loop with two fingers and rotate the line gently in the direction that opens it. If the loop still won’t relax after a few turns, cut it out.

Preventing Twist on the Spool

Good spooling habits reduce the problem more than any fix. Keep line tension firm but not tight when you fill the reel, and make sure the spool is loaded from the correct side. Check the bail and line roller regularly, and avoid letting a lure spin freely after a cast by stopping it with a quick reel-down motion.

Manufacturers of braided lines generally advise using a line-spooling station or a pencil-and-cloth setup to keep tension even. Follow the reel maker’s guidance on spool capacity and direction.

Common Mistakes

  • Pulling a loop tight instead of opening it gradually, which can damage the braid.
  • Reeling in with the bail open or the lure still spinning.
  • Spooling line directly off a bulk spool without a tension source.
  • Ignoring a worn swivel that twists the line every time you retrieve.
  • Keeping a kinked section in service rather than cutting it out.

A line spooling station helps you keep braid under steady tension while filling or refilling a reel, which reduces twist from the start. Search: View on Amazon

A quality ball-bearing swivel with a snap helps prevent line twist caused by lures rotating in the water. Search: View on Amazon

FAQ

Can I untwist braided line without removing it from the reel?

Yes, for light twist you can unspool a long section, stretch it out, and let it relax before reeling it back on. Heavy twist usually needs the line taken off the spool and rewound.

Does heat help untwist braided fishing line?

Avoid heat. Warm sun for a short time is fine, but direct heat or hot water can soften the coating and weaken the line.

When should I replace braid instead of untwisting it?

If the line has deep kinks, flattened sections, fuzzing, or has been crushed, cut it out or replace the spool. Read more about lifespan in How Long Does Braided Fishing Line Last? Lifespan and Replacement Signs.

Conclusion

Untwisting braided line comes down to finding the source, relaxing the line, and working it out gently. Good spooling habits and a swivel between your braid and lure will keep twist from coming back. For a fresh start, see How to Cut Braided Fishing Line Cleanly: A Step-by-Step Guide and How to Tie Braided Fishing Line to Swivel: 5 Steps to a Strong Connection.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our saltwater fishing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Saltwater Fishing.