We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Make Soft Plastic Fishing Lures: A Step-by-Step Guide for Beginners

Learn how to make soft plastic fishing lures at home, from choosing plastisol and molds to pouring, curing and finishing lures that catch fish.

Updated November 2026

Learning how to make soft plastic fishing lures lets you build baits in the exact colors, sizes and shapes you need for your local water. The process is simple at its core: heat plastisol, pour it into a mold, let it cure and then rig and finish the lure. Each step has a few details that make the difference between a clean bait and a soupy, tearing mess.

Gather the Tools and Materials

Before you melt anything, set up a dedicated workspace with good ventilation. Plastisol is typically heated to a specified pour temperature, and fumes can be unpleasant, so work outdoors or in a well-ventilated area. A complete beginner setup usually includes:

Shopping for one? See our guide: Making Soft Plastic Fishing Lures: 7 Best Kits and Plastisol Picks (2026).

  • Plastisol plastic in your chosen color and a few flavor or scent additives
  • A melting pot or dedicated lure-making pot with a thermometer
  • Silicone molds matched to the lure shapes you want
  • Pouring ladle or pitcher, plus nitrile gloves and safety glasses
  • Mold release spray or a light coat of vegetable oil
  • Toothpicks or wire for hooks and a dedicated timer

If you want a shortcut, a complete starter setup can get you moving quickly. Our guide to the Soft Plastic Fishing Lure Making Kit: A Step-by-Step Guide for Beginners walks through what a kit typically includes.

Heat and Color the Plastisol

Stir the plastisol thoroughly before heating, since the base can separate in storage. Heat it slowly in the pot, keeping it below the maximum temperature the manufacturer specifies, and stir gently to prevent scorching. Add color and scent only after the plastic is fully liquid. Add small amounts at a time, mixing until the color is even. Too much dye can make the lure dull and weak, so test a small batch first.

Pour the Molds Correctly

Lightly coat the mold with release spray or oil, then wipe away the excess so the surface is not slick. Pour slowly into each cavity, filling to the top, and tap the mold on the bench to release trapped air bubbles. Pour in one steady motion instead of stopping and starting, which can leave seams.

Insert Hooks and Wire Early

If your design uses a jig head or a weedless wire, place it in the mold before the plastic sets. Hold it in position until the plastic begins to firm, then let the lure cure undisturbed.

Cure, Demold and Finish

Allow the lures to cool for the time your plastisol instructions specify. Plastic that is removed too early can tear or deform. Once cool, gently flex the mold and pop the lures out. Trim any flash or thin seams with scissors, and coat the bait in a thin layer of scent if desired. Store lures in a sealed bag or container so they do not dry out or pick up dust.

Common Mistakes

  • Overheating the plastisol, which can burn it and produce a brittle lure
  • Skipping mold release, causing lures to stick and tear on removal
  • Pouring too fast, trapping air bubbles in the body
  • Demolding before the lure has cooled enough to hold its shape
  • Adding too much color or scent at once, which changes the texture

A dedicated pot with a built-in thermometer makes temperature control far easier than an improvised setup. View on Amazon

Silicone molds in the shapes you fish most often let you start pouring right away. View on Amazon

FAQ

Do I need special equipment to make soft plastic lures?

You need a heat-safe pot, a thermometer, silicone molds and plastisol. Gloves and safety glasses are strongly recommended while handling hot material.

How long does it take a soft plastic lure to cure?

Cure time depends on lure size and the plastisol product, so follow the manufacturer’s instructions. Larger baits generally need longer before demolding.

Can I reuse leftover plastisol?

Yes, you can often remelt leftover plastisol, but repeated heating can degrade it. Track how many times it has been melted and discard material that looks discolored or grainy.

Conclusion

Making your own soft plastic lures comes down to good prep, careful heating and patient curing. Start with one mold and one color, then expand as you learn how your plastisol behaves. Consult the manufacturer’s safety data for any material you use.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our saltwater fishing guides, checking product details against manufacturer specifications and owner feedback.

About the author

Caleb Morgan
Caleb Morgan

Caleb Morgan writes reviews and buying guides for Saltwater Fishing.