4 Best Fish Finder Mounts for Jon Boats (2026)

Updated November 2026

Choosing among fish finder mounts for jon boats comes down to a few practical questions: how much flat space your gunwale or console offers, whether you need a fixed bracket or an adjustable arm, how well the hardware resists corrosion, and whether the mount will hold a transducer or a display at the angle you want. Jon boats are light, flat and often rigged with a trolling motor, so a mount that works on a bass boat may not suit a 14-foot aluminum hull. The picks below were compared on listing specifications, brand reputation and the patterns owners commonly report, not on any hands-on testing.

Our Top Picks

Quick Comparison

Product	Best for	Key feature
Aluminum Boat Side Console Panel Mount for Fish Finders	Jon boats with limited console space	Extra-wide mounting panel in corrosion-resistant aluminum
Bzcovac Marine Electronic Mount	Anglers who want to adjust the screen angle	350° swivel with adjustable height
Universal Large Boats Side Console Mount Bracket	Boats that also carry switch panels	Mounting surface that accommodates fish finder and switch panels
WINDFRD Fish Finder Track Mount	Transducer-only setups and track-based rigs	1.5-inch track ball transducer mounting arm

Aluminum Boat Side Console Panel Mount for Fish Finders Boat Accessories

Best for: Jon boats with limited console space

This is a flat, extra-wide panel designed to bolt to a boat side console or similar vertical surface. It suits anglers who want a stable, permanent location for a fish finder and possibly a small switch panel beside it.

Key specs

• Extra-wide mounting panel
• Marine-grade, corrosion-resistant aluminum construction
• Designed for fish finders, switch panels and similar electronics

Pros

• Large footprint gives room for a display and accessories
• Aluminum resists the saltwater and freshwater exposure common on jon boats
• Simple flat design keeps the mount low-profile

Cons

• Fixed panel offers less viewing-angle flexibility than an articulating arm
• Requires drilling and sealing, so plan mounting holes carefully

Bottom line: A strong first choice for anglers who want a permanent, sturdy panel and have a clear flat surface on the console or side rail.

View on Amazon

Bzcovac Marine Electronic Mount

Best for: Adjustable viewing angles

This anodized aluminum bracket uses a swivel head so the display can be turned toward the operator. It fits anglers who run the screen from different positions, such as standing at the bow and sitting at the console.

Key specs

• 350° swivel rotation
• Adjustable height
• Anodized aluminum construction
• Mounting plate designed to fit most monitors

Pros

• Swivel and height adjustment make it easy to find a readable angle
• Anodized finish helps resist corrosion
• Generally straightforward to install with standard hardware

Cons

• Articulating joints can loosen over time on rough water, so periodic tightening is advisable
• Check screen size and bolt pattern before buying to confirm fit

Bottom line: Best suited to anglers who need the screen visible from more than one position and are willing to check tension occasionally.

View on Amazon

Universal Large Boats Side Console Mount Bracket

Best for: Crowded consoles

This bracket is marketed for larger console surfaces that need to hold a fish finder alongside switch panels. It is aimed at jon boats and pontoons that have been rigged with multiple electronics.

Key specs

• Designed for fish finders and multi-gang switch panels
• Corrosion-resistant construction
• Listed as fitting jon boats and pontoons

Pros

• Consolidates several accessories onto one mounting surface
• Corrosion-resistant build suits marine environments
• Universal design fits a range of console layouts

Cons

• Larger footprint may not suit small jon boat consoles
• Heavier load means the mounting surface should be verified as solid

Bottom line: Pick this if your jon boat already has or plans to add several switches and you want one unified mounting area.

View on Amazon

WINDFRD Fish Finder Track Mount with Transducer Mounting Arm for Kayak Boat

Best for: Budget-minded transducer setups

This is a track-based transducer arm with a 1.5-inch ball mount, intended to attach to a boat track. It suits anglers who want to position a transducer independently of the display and who already have compatible rails.

Key specs

• 1.5-inch track ball transducer mounting arm
• Designed for boat track installation
• Listed as compatible with several major fish finder brands, including Garmin Striker/ECHOMAP, Lowrance Elite/Hook and Humminbird

Pros

• Lets you aim the transducer separately from the display
• Track system allows repositioning without re-drilling
• Generally a budget-friendly option for transducer-only mounting

Cons

• Requires an existing track, which many jon boats lack
• Does not provide a display mount, so it is not a full console solution

Bottom line: A good match for anglers who already run track hardware and mainly need to position the transducer correctly.

View on Amazon

Buying Guide

Mount type: fixed panel, swivel bracket or track

Fixed panels are the most rigid and usually the cheapest to maintain. Swivel brackets let you angle the display for glare and visibility. Track systems let you move the transducer or arm without new holes. Match the type to how you actually fish.

Good picks for this: Aluminum Boat Side Console Panel Mount, Bzcovac Marine Electronic Mount

Corrosion resistance and material

Jon boats often live in wet, sun-exposed conditions. Look for marine-grade or anodized aluminum and fasteners rated for marine use. Stainless hardware paired with aluminum reduces galvanic corrosion when properly isolated.

Good picks for this: Aluminum Boat Side Console Panel Mount, Universal Large Boats Side Console Mount Bracket

Size and mounting surface

Measure the flat area on your console or gunwale before shopping. Confirm the display’s width and height and leave clearance for cables and the trolling motor controls. Many jon boats have limited flat space, so a smaller footprint may be necessary.

Good picks for this: Bzcovac Marine Electronic Mount, Aluminum Boat Side Console Panel Mount

Compatibility with your fish finder

Check the display’s bolt pattern or VESA-style hole spacing, and confirm the transducer cable length. Some brackets are listed for specific brands, so verify before ordering. Mount plates designed for “most monitors” still need a dimensional check.

Good picks for this: Bzcovac Marine Electronic Mount, WINDFRD Fish Finder Track Mount

Transducer placement

Transducer position affects signal quality more than most anglers expect. Mount it where water flows cleanly and the hull is not disturbed by a motor or strakes. Track arms and adjustable brackets make it easier to find that spot.

Good picks for this: WINDFRD Fish Finder Track Mount, Universal Large Boats Side Console Mount Bracket

Load and vibration

Jon boats transmit engine and trolling motor vibration into any mounted hardware. Choose a bracket with solid joints and use locking hardware. Tighten fasteners after the first few outings and recheck them periodically.

Good picks for this: Universal Large Boats Side Console Mount Bracket, Aluminum Boat Side Console Panel Mount

Installation and maintenance

Most mounts require drilling. Use a backing plate where the hull is thin, seal holes with marine sealant, and keep wiring away from moving parts. Rinse the hardware after saltwater trips to extend its life.

Good picks for this: Bzcovac Marine Electronic Mount, Aluminum Boat Side Console Panel Mount

FAQ

Can I mount a fish finder on a jon boat without drilling?

Some anglers use clamp-style or suction systems, but these are less secure on aluminum hulls and can slip in rough water. A drilled, bolted mount is more reliable for a permanent installation.

What is the best place to mount a fish finder on a jon boat?

A flat console or side panel near the operator is common. The display should be visible from the normal steering position, and the transducer should sit where water flow is smooth.

Do I need a track system for a transducer?

Not always. A track makes repositioning easier, but a fixed transducer mount works well if you have already found a stable location. Track arms are most useful when you fish varied water and want to adjust.

How do I prevent corrosion on a mount?

Use marine-grade or anodized aluminum, pair fasteners to avoid galvanic reactions, and rinse with fresh water after saltwater use. Applying a light marine-safe protectant to fasteners can help.

Will any mount fit my fish finder?

No. Confirm the display’s dimensions, bolt pattern and the transducer’s mounting requirements before buying. Some listings are compatible with specific brands, so check the model list.

Should I hire a professional to install a mount?

If you are uncertain about drilling into the hull, wiring or electrical connections, consult a marine technician or boat dealer. Improper installation can damage the boat or create electrical hazards.

Conclusion

For most jon boat anglers, the Aluminum Boat Side Console Panel Mount offers a sturdy, permanent surface for a display. Anglers who need to adjust viewing angles will prefer the Bzcovac swivel bracket. The Universal Large Boats Side Console Mount Bracket suits consoles that carry multiple switches, and the WINDFRD track arm is a practical option for transducer-only setups on boats that already have track hardware. Measure your console and confirm compatibility before choosing among these fish finder mounts for jon boats.

Sources

• Boating safety regulations, equipment requirements and recommended practices for small vessels (uscg.mil)
• Marine industry standards and guidance related to boat electronics and installation
• Information on marine conditions, water currents and the environment that affect electronics (noaa.gov)

Related reading

• Top 5 Best Jon Boat Fish Finder Picks Compared for Anglers
• 7 Best Heavy Duty Fish Finder Mount Options for Boats and Kayaks (2026)
• 6 Best Scotty Fish Finder Mount Options for Boats and Kayaks (2026)
• 5 Best Fish Finders for Jon Boat Options for Every Angler (2026)
• 4 Best Mounts for Fish Finder Options for Boats and Kayaks
• Yakattack Fish Finder Mount: 5 Best Picks Compared (2026)

About the author